Crown Plastic Pipes

(+971) 65436781



The Polyethylene Difference

Crown Plastics PE pipes are made from 100% virgin polyethylene and only contain UV stabilizers and pigments necessary for the pipes to conform to the specifications.

Pipes contain a minimum of 2.5% carbon black. All pipes are black in color for maximum UV resistance and suitable for drinking water and potable water supplies.

Crown Plastic pipes are produced in HDPE, LLDPE and LDPE material. HDPE pipes are produced in a number of design stresses against the standards ISO, DIN, EN and have a design coefficient “C” of not less than 1.25 to the MRS of the material as set out in Table I and Table 2. HDPE pipes can be produced in PE63, PE80 or PEIOO material.

Designation of Material

Relationship between MRS Os-and design coefficient C at 20 Degree C

Polyethylene Pipe System For Water Distribuyion

Pipes of High-Density Polyethylene (HDPE) Polyethylene (HDPE)

Polyethylene pipes with a design stress Os of 5 MP a (PE63)

Drip Tubing

Pipes of High Density Polythylene (HDPE)

Polyethylene Pipe with a Design Stress Os of 8 MPa (PE100)

Polyethylene Pipe with a Design Stress Os of 6.3 MPa (PE80)

Pipes of Low Density Polythylene (LLDPE)